HL32-100 series isolation switch is used in the distribution circuit and control cycle, AC50/60Hz, rated voltage 230V(1P, 2P), 400V(3P, 4P), rated current up to 100A. Mainly as main switch for terminal appliances, can be used for controlling various motors, small power appliances and illumination ect. Widely used in mining, high-rise building, commercial places & house Normal working & installment conditions
1.Ambient temperature: -5ºC~+40ºC, 24 hours average temperature not exceed +35ºC.
2.Installment plance altitude: ≤2000m
3.Gas relative humidity:not exceed 50% at +40ºC, higher humidity allowed at lower temperature.
4.Pollution degree: 2 class
5.Installment condition: Mounted in the place without obvious impact or shock, no dangerous(explosion) dielectric without corrosive metal or damaging isolation gas(conductive dust).
6.Installment method: TH35-7.5 mounted rail, can be installed in distribution board, case or box. Generally mounted vertically. Tilted angle between mounting face and vertical face not exceed ±5°.
7.Mounted Category: II,III class.Specification
Packing and shipping
|Rated current Ie||16~100A|
|Case current class||100A|
|According to standands||GB14048.3|
|No load operation life||8500 times|
|Normal load operation life||1500 times|
|Rated working voltage Ue||230V|
|Rated limited shortcircuit current||20kA|
|Rated closing & breaking capacity||1.05Ue, 3In, cosΦ=0.65|
|Rated shor-time withstand current Icw||12Ie (1s)|
|Rated shortcircuit closing capacity Icm||20Ie (0.1s)|
-- Ordinary paper carton for products.
-- Shipping mark according to customer's request.
-- Bulk production will be deliveried by sea and air.Our Service
-- We have our own factory, professional manufacturer
-- We can send you samples within one week.
-- We do OEM & ODM services .
-- We control quality strictly, quality problem: 100% compensation or change
Welcome to visit our factory. Welcome customer or your agent to inspect before order and before lading.