LXP1 series Limited Switch
LXP1 series travel switch is suitable for AC40~60Hz, rated voltage AC500V or DC600V, current up to 10A control circuit, transfer mechanical signal to electric signal, can control the travel of action machines and speed or program control.
The switch is divided into open-type and protection type two categories, open type can be divided two poles and three poles, two poles open type can be divided into instant action, creep, creep single bridge and wriggle cross four type via contact bridge, three poles open type only has creep type. Protection type divides into two poles, three poles, four poles; contacts divide into 1NO 1NC, 1NO 2NC, 2NO 1NC and 2NO 2NC.
Normal working & installment conditions
1. Surrounding gas temperature, maximum not exceed +40ºC; minimum not below -25ºC, 24h average not exceed 35 ºC
2. Altitude not below 2000m
3. Air relative humidity not exceed 50% when surrounding gas temperature is+40ºC; higher value allow at lower temperature; the wettest month average max humidity is 90%, the average mini temperature is 25 ºC
4.In no explosive danger environment, without corroding metal or damage isolation gas or electric dust.
5. Pollution degree:3 ; mounting category:III
1.Rated isolation voltage: Ui=AC500V, DC600V
2.Max working voltage: Ue=500V(polarization)
3.Rated heating current: Ith=10A
4.Mechanical life: 30,000,000 times; electrical life: 1A/AC-11 500,000 times, 0.5A/AC-11 10,000,000 times
5.Outlet hole: M20X1.5
6.Contact connect wire capacity: single 2X25 mm²; multistrand 2X1.5mm²
Packing and shipping
|Voltage Ue(V)||Current Ie/AC-11(A)||Voltage Ue(V)||Current Ie/DC-11(A)|
-- Ordinary paper carton for products.
-- Shipping mark according to customer's request.
-- Bulk production will be deliveried by sea and air.Our Service
-- We have our own factory, professional manufacturer
-- We can send you samples within one week.
-- We do OEM & ODM services .
-- We control quality strictly, quality problem: 100% compensation or change
Warmly welcome to visit our factory. Welcome customer or your agent to inspect before order or lading.